How to Lubricate a Walking Pad
To lubricate a walking pad, unplug it, lift the belt, apply walking pad-safe silicone lubricant under both sides, then run it slowly to spread the oil. Check the manual first because access and lubricant instructions vary by model.
On this page (9 sections)
- What should you check before lubricating a walking pad?
- How do you access the walking pad belt?
- How do you apply walking pad oil?
- How do you lubricate the full belt width?
- How do you spread lubricant after application?
- What other walking pad maintenance should you do?
- Can you use treadmill lubricant on a walking pad?
- How do you know a walking pad needs lubricant?
- What is the safest way to lubricate a walking pad?
To lubricate a walking pad, unplug it, lift the belt, apply approved silicone lubricant under both sides, and run the pad slowly to spread it. Check the manual before starting because walking pads differ in belt access, lubrication points, and recommended products.
Lubrication helps reduce dry contact between the belt and deck. It is one part of routine care, along with cleaning dust, checking belt alignment, and keeping the walking pad on a suitable surface.
If you're still choosing equipment, our guide to treadmill exercise machines explains how walking pads compare with other treadmill types.
What should you check before lubricating a walking pad?
Read the manual and confirm that the belt requires user-applied lubricant. Some walking pads have specific access points, while others may use a different maintenance system.
Gather silicone lubricant, a clean cloth, and enough space to reach both sides of the belt. Keep the walking pad switched off and unplugged while you inspect or lift the belt.
Do not use cooking oil, motor oil, penetrating spray, or grease unless the manual specifically approves it. These products may not suit the belt or deck materials.
For a general comparison of silicone options, see our guide to the best treadmill lubricating oil. Walking pads and treadmills use similar belt-care ideas, but the manual for your exact model still controls.
How do you access the walking pad belt?
Use the belt edge to create a small opening between the belt and deck. You usually do not need to remove the belt, but the amount of access depends on the frame and belt tension.
Unplug the walking pad first. Stand beside the unit, lift one belt edge gently, and look for a clear path under the belt.
If the belt feels very tight or you need force to lift it, stop and check the manual. Do not pry against the deck or pull hard enough to stretch the belt.
Apply lubricant near the front half of the deck and repeat on the other side if the instructions allow. Avoid pouring lubricant in one large spot because it can spread unevenly.
Which silicone lubricant suits a walking pad?
A silicone lubricant made for treadmill belts is the simplest choice when your manual allows silicone. Choose based on the application method, bottle size, and whether you want one bottle or a pack.
Super Lube Silicone Oil High & Low is a 4 fluid ounce bottle of 5000 cSt silicone oil. It is compatible with rubber, plastic, and metal, and its title identifies high and low temperature stability.

A 4 fluid ounce, 5000 cSt silicone oil for readers who want a medium-viscosity bottle that suits rubber, plastic, and metal surfaces.
See it on AmazonIts bottle format suits careful users who want to control the amount by hand. The higher viscosity may help it remain as a coating, but you still need to spread it evenly under the belt.
Choose it only when the walking pad manual allows this type of silicone oil. The product is not presented as a walking pad-specific applicator, so you may need to take extra care during placement.
For another comparison, see the best silicone lubricant for treadmill.
How do you apply walking pad oil?
Apply a thin, even line under the belt on each accessible side, then spread it by running the pad slowly. Use the manual's amount if it provides one.
- Unplug the walking pad.
- Lift the belt edge on one side.
- Apply a small amount of approved silicone lubricant under the belt.
- Repeat on the other side.
- Lower the belt and wipe away any visible excess.
- Plug the unit in only after the outside surfaces are clean.
- Run the belt slowly without standing on it, if the manual permits.
- Stop and inspect the belt for slipping or uneven movement.
Do not flood the deck. Excess lubricant can move toward the belt edges, floor, or motor area.
Is a two-bottle pack useful for walking pad maintenance?
A two-bottle pack can suit homes with more than one piece of fitness equipment or readers who want a spare bottle. The application method matters as much as the quantity.
IMPRESA Silicone Treadmill Belt Lubricant includes 2 bottles, with each bottle holding 4 fluid ounces. Each bottle has a twist-top application design, and the product is described for treadmills, ellipticals, and walking pads.

Two 4 fluid ounce bottles with twist-top application, useful when you want a walking pad lubricant set with a spare bottle.
See it on AmazonThe twist-top design may make controlled application easier than pouring from a wide opening. IMPRESA also identifies compatibility with NordicTrack, Sole, and ProForm treadmill models, but confirm your walking pad's manual before use.
The pack may be more than you need if you maintain one walking pad infrequently. Store the bottles closed and keep the lubricant away from the walking surface.
For more product-specific options, compare the best walking pad lubricant.
How do you lubricate the full belt width?
Use an extension tube when the belt opening is narrow or you need to reach farther under the deck. This can help place lubricant without lifting the belt as far.
Action Fitness 100% Silicone Treadmill Lubricant is a 2-pack of 4 ounce bottles. It includes an 11 inch extension tube and a twist spout, giving you two application methods.

Two 4 ounce bottles with an 11 inch extension tube and twist spout for reaching farther under a walking pad belt.
See it on AmazonThe extension tube suits walking pads where the belt is difficult to lift across the deck. The twist spout may suit smaller maintenance points or controlled application.
Action Fitness describes the lubricant as 100% silicone and lists use across most treadmill brands, ellipticals, bicycles, and hinges. Those broad uses do not replace the walking pad manufacturer's instructions.
Choose this pack if access is your main problem. If you can easily lift the belt and want a single bottle, a smaller setup may be easier to store.
How do you spread lubricant after application?
Run the walking pad slowly while nobody is standing on it, if the manual allows this step. Let the belt make several passes, then switch the unit off and check for excess lubricant.
Watch the belt as it moves. It should track evenly without slipping, bunching, or making a new rubbing sound.
If the belt slips, stop the unit and inspect for too much lubricant, incorrect belt tension, or another maintenance issue. Do not compensate by adding more oil.
A walking pad that still makes unusual noise after cleaning and approved lubrication may need belt alignment, tension adjustment, or professional service.
What other walking pad maintenance should you do?
Clean the belt and deck area, inspect alignment, and keep dust away from moving parts. Lubrication cannot correct every belt problem.
Wipe visible dust from the walking surface and nearby frame with a suitable dry or slightly damp cloth. Keep moisture away from electrical openings and allow surfaces to dry before use.
Check whether the belt stays centered during slow operation. If it drifts, follow the manual's alignment procedure rather than turning adjustment bolts at random.
Keep the walking pad on a stable surface with enough clearance around it. Do not place objects where they can touch the moving belt.
If you use a Urevo model, follow the model-specific steps in how to lubricate a Urevo walking pad.
Can you use treadmill lubricant on a walking pad?
You can use treadmill belt lubricant on a walking pad only when the walking pad manual approves the lubricant type. Many products are marketed for both treadmills and walking pads, but model instructions vary.
A walking pad may have a compact deck, a different belt construction, or a specific access method. Match the lubricant to the manual, then apply a small amount evenly.
Do not assume that a product described as universal will suit every walking pad. The product's application tools can help with access, but they do not confirm compatibility with your model.
Walking pad care is different from chain care. For a separate machine, see how to lubricate a rowing machine chain.
How do you know a walking pad needs lubricant?
Dry belt movement, extra rubbing noise, or hesitation can signal that maintenance is due, but they can also point to alignment or tension problems. Inspect the pad before adding oil.
Check the manual's service schedule and look under the belt for signs of dryness if access is safe. A belt that is already slipping should not be treated with more lubricant without finding the cause.
If you are deciding between low-impact equipment types, is a rowing machine better than a treadmill compares how the machines serve different workouts.
What is the safest way to lubricate a walking pad?
The safest method is to follow the manual, unplug the unit, use approved silicone lubricant, apply a small amount, and test the belt without a user on it.
Pick Super Lube Silicone Oil High & Low if you want a 4 fluid ounce, 5000 cSt silicone oil for controlled application. Pick IMPRESA if a 2-bottle twist-top set suits your maintenance routine.
Pick Action Fitness if its 11 inch extension tube solves limited belt access.
For a belt-specific step sequence, read how to add lubricant to a treadmill, then adapt it to your walking pad manual. The right product matters, but correct access, a light application, and a slow inspection matter just as much.
Frequently asked questions
How often should you lubricate a walking pad?
Follow your walking pad manual first. If it gives no interval, inspect the belt for dryness, hesitation, or extra noise and lubricate only when the equipment instructions allow it.
Usage, belt material, and the walking pad design affect the right schedule.
What oil can you use on a walking pad?
Use a silicone lubricant that your walking pad manual approves. Do not substitute motor oil, cooking oil, penetrating oil, or general grease.
Silicone products made for treadmill belts may also suit walking pads, but the manual's compatibility instructions take priority.
How much lubricant should you put on a walking pad?
Use the amount stated in the walking pad manual. If the manual gives no quantity, apply a small, even amount under the belt rather than soaking the deck.
Too much oil can spread beyond the belt and create a slipping or messy surface.
Should you run a walking pad after lubricating it?
Yes, if the manual allows it. Plug the walking pad back in, run it at a slow speed without standing on it, and let the belt make several passes so the lubricant spreads.
Stop if the belt slips, makes unusual noise, or moves unevenly.
About this guide: Our look at lubricating a walking pad draws on maker specs, materials and what owners report. See how we research.



