Guide

How to Clean a WaterRower Tank

Updated on · By the TopRai team

Clean a WaterRower tank by draining and refilling it only when needed, then use WaterRower-approved purification tablets as directed. Wipe the outside with a soft cloth, and keep household cleaners, oils, and unapproved chemicals out of the tank.

On this page (7 sections)
  1. How do you clean a WaterRower tank?
  2. What water treatment should you use?
  3. Should you drain the tank to remove cloudy water?
  4. What should you keep out of the tank?
  5. How should you clean the tank exterior?
  6. Can you use WaterRower cleaning advice for other rowers?
  7. What should you do after cleaning a WaterRower tank?

Clean a WaterRower tank by following the model's water-treatment instructions, replacing the water only when needed, and wiping the tank exterior with a soft cloth. Don't pour general-purpose cleaners, lubricant, or unapproved chemicals into the tank.

For most routine care, focus on maintaining the water rather than scrubbing the inside. Check your WaterRower manual for the correct treatment, dose, and replacement guidance for your model.

How do you clean a WaterRower tank?

Treat the tank water with the purification product WaterRower recommends, and drain the tank only when its care instructions call for it. Keep the rower stable, protect the floor, and follow the model's directions before opening any tank fittings.

  1. Check the manual for the water treatment and service instructions.
  2. If water replacement is needed, use the rower's specified draining and refilling method.
  3. Add only the recommended treatment, using its stated dose.
  4. Wipe the outside of the tank and nearby surfaces with a soft cloth.
  5. Check for leaks and make sure the tank fittings are secure before rowing.

Don't scrub inside the tank with an abrasive pad or use a household cleaner unless WaterRower says it's suitable. A cleaner that works on the tank exterior may not be safe for water or internal parts.

For a broader walkthrough that covers different water rowing machines, read How to Clean a Water Rowing Machine Tank?.

What water treatment should you use?

Use a treatment approved for your WaterRower model and follow its instructions exactly. Water treatment helps maintain tank water between changes, but the correct product and schedule depend on the manufacturer's guidance.

Don't assume that a tablet made for another brand's tank is compatible. Check its label and your WaterRower manual before using it, and don't increase the dose if the water looks unusual.

Our guide to Best Rowing Machine Cleaning Tablets For Water Tank explains what to check when choosing tablets. For help with ongoing water care, see How to Maintain a Water Rowing Machine Tank Water Quality?.

Should you drain the tank to remove cloudy water?

Drain cloudy water only if the WaterRower instructions call for a water change or another service step. First check the treatment history, the tank's appearance, and any model-specific guidance.

Cloudiness may have more than one cause. Avoid adding bleach, vinegar, or extra treatment as a guess, since the wrong chemical or dose could harm tank parts.

For possible causes and practical checks, read Why Is My Water Rowing Machine Tank Cloudy?. If cloudiness returns after following the recommended treatment, contact WaterRower support with your model information.

What should you keep out of the tank?

Keep lubricants, household cleaners, and unapproved chemicals out of the tank. A product described as food grade or suitable for machinery isn't automatically safe for a rowing tank or its water.

The Petrol-Gel lubricant is intended for machinery parts and other specified uses, not tank-water treatment. Use it only if your rower's maintenance instructions call for lubrication on a compatible external part.

Don't apply lubricant to the tank or mix it with water. Check your manual for the correct lubricant and application point before maintaining moving parts.

How should you clean the tank exterior?

Wipe the tank exterior with a soft, slightly damp cloth, then dry it. Keep moisture away from the monitor and electrical connections, and don't spray cleaner directly onto the rower.

Use a cleaner on exterior surfaces only if WaterRower's instructions allow it. Avoid abrasive pads that could scratch the tank, and check around the fittings for moisture after wiping.

If you want a separate seat accessory that can be wiped clean, the Hornet Watersports cushion is described as compatible with WaterRower and other rowers. Its care directions say to wipe it with a wet cloth and let it dry.

This cushion doesn't clean or treat the tank. Keep seat care separate from tank care, and follow each accessory's own instructions.

Can you use WaterRower cleaning advice for other rowers?

No, use the instructions for the exact rower model and tank you own. Different machines can use different tank materials, treatments, and draining methods.

A Concept2 RowErg uses air resistance, so it doesn't have a water tank to clean. Its care needs differ from those of a WaterRower.

If you're comparing the two machine types, see Is Hydrow Better Than Waterrower?. Check the relevant manufacturer's manual before applying any maintenance advice from another brand.

What should you do after cleaning a WaterRower tank?

Confirm the tank is sealed, the water is treated as directed, and the surrounding floor is dry before rowing. Check for drips after the rower has been moved or serviced.

Follow the manual's storage and maintenance schedule, and keep a note of when you last treated or changed the water. If you notice a leak, damaged fitting, persistent odor, or recurring cloudiness, pause use and ask WaterRower support for model-specific guidance.

Choose the WaterRower's approved treatment for routine water care, and drain only when its instructions call for it. For a machine without a water tank, use its own maintenance guide instead.

Frequently asked questions

How often should I clean my WaterRower tank?

Wipe the tank exterior when it needs it, and follow WaterRower's instructions for treating the water and deciding when to replace it. Water treatment helps limit growth in the tank, so routine draining and scrubbing may not be needed.

Check your model's manual if the water looks cloudy or develops an odor.

Can I use bleach to clean a WaterRower tank?

Don't add bleach or household cleaners to the tank unless WaterRower specifically approves them for your model. They may affect tank materials or seals, and they aren't a substitute for the recommended water-treatment method.

Use only the amount and type of treatment stated in the manual.

Can I use tap water in a WaterRower?

Use the water type recommended in your WaterRower manual, and follow its treatment directions. Water quality varies, so tap water may need treatment to help limit growth.

Don't add extra chemicals to compensate; check the manual or contact WaterRower support if you're unsure.

What should I do if my WaterRower tank is cloudy?

Check that the tank has the recommended water treatment and that you used it according to the instructions. Cloudiness can have several causes, so avoid guessing with bleach or other cleaners.

See our guide to cloudy water rowing machine tanks for possible causes and next steps.