Guide

How to Update a Concept2 PM5 Monitor

Updated on · By the TopRai team

To update a Concept2 PM5 monitor, use Concept2's current update instructions and compatible software or app for your device, then follow the on-screen prompts. Keep the monitor powered and connected until the update finishes.

On this page (6 sections)
  1. What do you need before a Concept2 PM5 update?
  2. How do you update a Concept2 PM5 monitor?
  3. Which update method should you use?
  4. What should you check if the update won't start?
  5. When should you replace a PM5 instead of updating it?
  6. How do you confirm the PM5 update finished?

To update a Concept2 PM5 monitor, use Concept2's current update instructions and a compatible app or software, then follow the prompts for your device. Keep the monitor powered and connected until the update completes.

The steps can change with the update method and the device you're using, so start with Concept2's official guidance. Don't begin with a low battery or a loose connection.

What do you need before a Concept2 PM5 update?

Before a Concept2 PM5 update, confirm the monitor has power and identify a compatible update method for your phone, tablet, or computer. Check Concept2's current instructions for the software, connection, and device requirements.

If you're updating a PM5 on a RowErg, its monitor uses 2 D cell batteries, and the spinning flywheel supplies power during a workout to extend battery life. For an update, follow Concept2's directions for keeping the monitor powered; don't assume the workout power arrangement is enough while you're stationary.

Have the monitor and your device close together if the method uses a wireless connection. If you're using a cable, check that it fits securely and isn't damaged.

The PM5 comes with the Concept2 RowErg, which has a device holder and Bluetooth and ANT+ connectivity for apps and heart rate monitors. {{product B00NH9WEUA | The RowErg includes a PM5, device holder, and wireless connections for apps and heart rate monitors.}}

How do you update a Concept2 PM5 monitor?

Follow Concept2's update instructions for your chosen device and connection method. Keep the monitor connected and powered while the software checks for and installs available firmware.

  1. Check the PM5's power and inspect the connection you plan to use.
  2. Open Concept2's current update guidance and choose the method for your device.
  3. Connect the monitor as instructed, then start the update process.
  4. Follow the prompts and leave the connection in place while the update runs.
  5. Wait for the process to finish before closing the software or disconnecting.
  6. Restart or check the monitor only as Concept2 directs.

Don't switch methods midway through an update. If the update doesn't start, stop and check compatibility and connection details rather than repeatedly disconnecting the monitor.

Which update method should you use?

Use a method Concept2 currently supports for your device and PM5. The right choice depends on what the brand lists as compatible, so check the official instructions instead of relying on an old tutorial.

A phone or tablet can be convenient if the supported method uses an app and a compatible wireless connection. A computer may suit you better if Concept2 directs you to use computer software or a cable.

The Merach R50 Pro and R60N have a backlit monitor, multiple training modes, and app syncing, but that monitor is not a Concept2 PM5. Its update process and compatibility are separate from the PM5's. {{product B0GXBFLCN7 | A separate rowing machine option with a backlit monitor and MERACH app syncing.}}

If you need basic help with the PM5's workout display and setup, see how to use a Concept2 rowing machine. For a broader explanation of the machine, read what a Concept2 rowing machine is.

What should you check if the update won't start?

Check power, compatibility, and the connection before trying again. A loose cable, unsupported device, or interrupted wireless link can prevent the update from proceeding.

  • Make sure the monitor has power and is awake.
  • Confirm your app or software matches Concept2's current instructions.
  • Check that the cable or wireless connection is active.
  • Close and reopen the update software if the instructions allow it.
  • Don't remove batteries or unplug the monitor while an update is in progress.

If the monitor itself won't turn on, use Why Won’t My Rowing Machine Turn On? to work through basic power checks. If the display is frozen or behaving unexpectedly, review how to reset a rowing machine monitor and follow the PM5-specific guidance before resetting.

A monitor that still fails to update may need help from Concept2 support. Share the PM5 model and the error or behavior you see, and describe the device and connection method you used.

When should you replace a PM5 instead of updating it?

Try the supported update steps first if the monitor powers on and responds. Consider replacement if the PM5 is damaged or remains unusable after you follow Concept2's troubleshooting guidance.

A firmware update won't repair a cracked screen, damaged buttons, or a power fault. For replacement steps and fit information, see how to replace a Concept2 PM5 monitor.

If you're troubleshooting a different rower's power, don't assume its battery or reset steps match the PM5. This Matrix rowing machine battery guide covers a separate model family.

The JOROTO water rower has a Bluetooth monitor that connects to the JOROTO app. It is a separate system, so Concept2 PM5 firmware instructions don't apply. {{product B0H2HNPXTX | A water rower with its own Bluetooth monitor and JOROTO app connection.}}

How do you confirm the PM5 update finished?

Wait for the update process to confirm completion, then check the monitor as Concept2 directs. Don't disconnect early just because the screen pauses or the software appears to be processing.

Once the monitor is ready, confirm it starts normally and that its buttons respond. If an error remains, note the message before closing the app or software, then use Concept2's support guidance.

For a Concept2 PM5 update, choose the current supported method for your device and keep power and connection steady through completion. If the monitor won't start or respond after the update, check the relevant power or replacement guidance before trying another update.

Frequently asked questions

How do I update a Concept2 PM5 monitor?

Use Concept2's current PM5 update instructions and the compatible app or software for your computer or mobile device. Check the monitor's power and connection first, then follow the prompts and keep the connection in place until the process finishes.

The exact steps can depend on your device and the update method.

Does a PM5 update erase workout history?

Don't assume workout history will remain on the monitor through an update. Before starting, review Concept2's current instructions and save or transfer workouts if the guidance recommends it.

If the monitor contains data you need, resolve backup questions before installing firmware.

Can I update a PM5 from a phone?

A phone may be an option if Concept2 currently supports the PM5 update method for your phone and operating system. Check the brand's update guidance for compatible devices and app requirements, then keep the phone near the monitor and avoid interrupting the process.

What should I do if a PM5 update fails?

If an update fails, check the connection, power, and device compatibility, then follow Concept2's recovery guidance before trying again. Don't remove batteries or disconnect a cable during an active update unless the instructions tell you to.

Contact Concept2 support if the monitor won't restart or connect afterward.