Guide

How to Replace a Concept2 PM5 Monitor

Updated on · By the TopRai team

Replace a Concept2 PM5 with a compatible PM5 monitor, then reconnect its cable and mount it on the monitor arm. Check your rower’s instructions and the replacement monitor’s compatibility before removing the old unit.

On this page (8 sections)
  1. How do you replace a Concept2 PM5 monitor?
  2. What should you check before buying a replacement PM5?
  3. What tools and precautions do you need?
  4. How can you tell whether the monitor or batteries are the problem?
  5. What should you do after installing the new monitor?
  6. Can another rowing monitor replace a Concept2 PM5?
  7. When should you contact Concept2 for help?
  8. How do you choose between troubleshooting and replacement?

To replace a Concept2 PM5 monitor, confirm that the replacement is compatible with your rower, disconnect the old monitor, then connect and mount the new one according to Concept2’s instructions. Check the cable and mounting arm before starting, and stop if either part looks damaged.

A monitor that will not start may have a simpler cause than a failed display. Review Why Won’t My Rowing Machine Turn On? first, then decide whether to troubleshoot, reset, or replace the PM5.

How do you replace a Concept2 PM5 monitor?

Use a compatible PM5 and follow the instructions for your specific Concept2 machine. The basic job is to remove the old monitor from its mount, disconnect its cable, connect the replacement, and secure it in place.

  1. Stop rowing and make sure the flywheel has stopped.
  2. Check Concept2’s instructions for your rower and replacement monitor.
  3. Note how the monitor is mounted and how its cable is routed.
  4. Disconnect the cable as directed, without pulling on the wire.
  5. Remove the old monitor from its arm or bracket.
  6. Attach the replacement, reconnect the cable, and secure any hardware.
  7. Confirm the cable is clear of moving parts, then start the monitor and check its display.

The exact fasteners and connection details can depend on the rower and monitor version. Don’t force a connector or improvise a mount if the parts don’t fit.

If the new monitor turns on but behaves unexpectedly, try the manufacturer’s troubleshooting steps before changing settings. Our guide to How to Reset a Rowing Machine Monitor? covers general reset checks.

What should you check before buying a replacement PM5?

Confirm compatibility with your Concept2 rower before ordering. Check the machine model, monitor connection, mounting arrangement, and whether any extra parts are required.

Use the model information on your rower and current monitor when contacting Concept2 or a parts supplier. Ask whether the replacement monitor includes the parts needed for your setup, and whether your existing cable can be reused.

A replacement is for owners of a compatible Concept2 machine. If you’re comparing complete rowers instead, the Concept2 RowErg includes a PM5, device holder, and user manual.

The RowErg’s PM5 tracks workout data, and its monitor can connect wirelessly to apps and heart rate monitors through Bluetooth and ANT+. If your goal is simply to restore the display on a rower you already own, confirm the replacement monitor separately before buying a full machine.

For background on the machine and its monitor, see What Is Concept 2 Rowing Machine?. If you’re new to rowing on one, How To Use Concept 2 Rowing Machine? explains how to get started.

What tools and precautions do you need?

Use only the tools and steps specified in the instructions for your machine and monitor. Keep the rower still, protect the cable, and avoid putting pressure on the display or connector.

Before removing anything, take a quick photo of the cable route and monitor position. This can help you put the cable back where it belongs, but it does not replace the manufacturer’s instructions.

Don’t tug, twist, or bend the cable to free it. If a connector feels stuck or a fastener won’t loosen, stop and check the manual or ask Concept2 for guidance.

Keep screws and small parts together as you work. If the replacement doesn’t sit securely or the cable can reach the flywheel or another moving part, don’t use the rower until the issue is corrected.

How can you tell whether the monitor or batteries are the problem?

Check the recommended power and connection steps before assuming the monitor has failed. A blank or inconsistent screen can have more than one cause, so follow Concept2’s troubleshooting guidance first.

The Concept2 RowErg uses 2 D cell batteries, and its PM5 can draw power from the spinning flywheel during a workout to extend battery life. That detail applies to the RowErg; check the instructions for your own machine before changing batteries or diagnosing its power source.

If your monitor responds after a reset or connection check, replacement may not be needed. For a Concept2 PM5 software change, use How to Update a Concept2 PM5 Monitor and follow Concept2’s update instructions.

A battery issue on another brand’s rower calls for that machine’s own guidance. The matrix rowing machine battery guide covers a different monitor and battery setup.

Should you reset the monitor before replacing it?

Try the reset steps recommended for your monitor before buying a replacement. A reset may address a temporary issue, but it won’t repair a damaged screen, cable, or connector.

Record any settings or workout data you want to keep before resetting. For reset steps and common checks, see How to Reset a Rowing Machine Monitor?.

What should you do after installing the new monitor?

Check that the screen starts, the controls respond, and the cable stays clear during movement. Follow the monitor’s setup instructions before relying on its workout readings.

Start with the rower stationary. Confirm that the monitor powers on and that the buttons or menu controls respond as expected.

Then follow Concept2’s instructions for checking the monitor while the rower is in use. Keep hands and loose items clear of the flywheel and chain, and stop if the display cuts out or the cable shifts.

If you use an app or heart rate monitor, reconnect it using the PM5’s documented pairing steps. The RowErg’s PM5 supports Bluetooth and ANT+ connections, but check compatibility for the specific device or app you use.

Can another rowing monitor replace a Concept2 PM5?

A monitor from another brand should not be treated as a PM5 replacement. Its mount, cable, and data system may differ, so choose a replacement confirmed for your Concept2 rower.

The Merach R50 Pro and R60N are separate rowing machines with their own backlit performance monitor. They are not identified as compatible PM5 replacements.

This Merach model has 20+ training modes and stores workouts locally, with app syncing available. Consider it only if you’re comparing a different machine, not trying to fit a PM5 to your Concept2.

The JOROTO water rower also has its own Bluetooth monitor and app connection. It is a separate machine, not a substitute monitor for a Concept2.

Pick a standalone monitor replacement when you want to keep using a compatible Concept2 rower. Compare another rower only if replacing the machine itself is part of your plan.

When should you contact Concept2 for help?

Ask Concept2 or an authorized parts supplier when compatibility, cabling, or mounting is unclear. Share the rower model and the information from the old monitor so they can help identify the right replacement.

Get help before proceeding if the cable is frayed, the connector is damaged, the monitor arm is loose, or the new unit does not fit. Avoid using the rower if the monitor cannot be secured or the cable may contact moving parts.

How do you choose between troubleshooting and replacement?

For a Concept2 PM5 monitor replacement, first confirm compatibility and check the power, cable, and reset steps in Concept2’s instructions. Replace the monitor when Concept2’s guidance points to a failed unit and you’ve confirmed the correct part.

Choose the Concept2 RowErg if you’re shopping for a complete machine with a PM5. Compare the Merach or JOROTO only when you’re considering a different rower with its own monitor.

If the current display still works and you want to improve its software, follow the PM5 update guide. If it remains unresponsive, use the troubleshooting steps and contact Concept2 before ordering a replacement.

Frequently asked questions

Can I replace a Concept2 PM5 monitor myself?

You can replace the monitor if you have a compatible PM5 and can safely access its mount and cable. Follow Concept2’s instructions for your rower and monitor, and stop if the cable, connector, arm, or mounting hardware is damaged.

Contact Concept2 support if you’re unsure which replacement fits.

Does a replacement PM5 work with every Concept2 rower?

Check the replacement monitor’s compatibility with your specific Concept2 machine before buying. Confirm the model and any required cable or mounting parts with Concept2, since fit and connection details can vary.

Keep your current monitor’s model information and rower details handy when asking for help.

Will replacing a PM5 erase workout data?

Workout data stored on the old monitor may not transfer automatically to a replacement. If you want to keep workouts, check Concept2’s current instructions for saving or transferring data before disconnecting anything.

App or online records may be separate from data stored directly on the monitor.

Should I reset or replace a PM5 that will not turn on?

Check the batteries, cable connections, and Concept2 troubleshooting steps before replacing the PM5. If the monitor still fails after the recommended checks, contact Concept2 to confirm whether the monitor or another part needs service.

A dark screen alone does not identify the failed part.